Views: 0 Author: Site Editor Publish Time: 2023-09-06 Origin: Site
After the workpiece is clamped once on the Vertical Machining Center, the digital control system can control the machine tool to automatically select and change tools according to different procedures, mechanically amendment the spindle speed, feed, and therefore the motion path of the tool relative to the work and alternative auxiliary functions. A complete multi-process process on many surfaces of the piece of work. And there is a variety of tool change or tool selection functions so that the production efficiency is greatly improved. Next, let's take a look at the definition and advantages of the Vertical Machining Center. Here are some answers.
Here is the content list:
What is Vertical Machining Center?
The advantages of Vertical Machining Center.
Vertical Machining Center will complete processes like edge, boring, drilling, tapping, and cutting threads. Vertical Machining Center is a minimum of three-axis and two-linkage and usually can do three-axis and three-linkage. Some will perform five-axis or six-axis management. Vertical Machining Center column height is limited, and the processing range of box-like workpieces should be reduced. This is the shortcoming of Vertical Machining Center. However Vertical Machining Centerpiece of work clamping and positioning area unit convenient; the cutting implement movement track is straightforward to look at, the debugging program is convenient to visualize and live, and therefore the downside is often found in time, and therefore the termination method or modification are often performed; the cooling condition is simple to determine, and therefore the cutting fluid will directly reach the tool and therefore the process surface. The 2 coordinate axes area unit per the coordinate system, and therefore the intuitive feel is per the viewing angle of the drawing. The chips are simple to get rid of and fall to avoid scratching the processed surface. Compared with the corresponding horizontal machining center, the structure is easy, the ground house is smaller, and therefore the worth is lower.
First, the Vertical Machining Center is convenient for workpiece clamping and positioning. Second, it is easy to observe the movement trajectory of the cutting tool, and it is convenient to check and measure the debugging program. Problems can be found in time, and the machine can be shut down for processing or modification. Third, the cooling conditions are easy to establish, and the cutting fluid can directly reach the tool and the machined surface. Fourth, the chips are easy to remove and fall to avoid scratching the processed surface. Fifth, compared with the corresponding horizontal machining center, the Vertical Machining Center has a simple structure and a smaller footprint. It is widely used in the processing of complex parts such as plates, plates, molds, and small shells.
For more questions about Vertical Machining Center, please consult us. Years of accumulated R&D and production expertise can give you additional product services and technical support! Our official website is https://www.saintymachine.com/. Sainty Machinery has always been adhering to technological innovation to provide cost-effective products, allowing customers to enjoy the results of technological innovation at a lower cost, and continue to create greater value for customers.